Oshkosh Corporation JLG 3394RT, Руководство по эксплуатации и безопасности

Страница: 62 / 100

SECTION 4 - MACHINE OPERATION
3121132 – JLG Lift – 4-11
4.11 SAFETY PROP
THE SAFETY PROP MUST BE USED WHENEVER MAINTENANCE PER-
FORMED ON THE MACHINE REQUIRES THE SCISSOR ARMS TO BE
RAISED.
To engage the safety prop, raise the unloaded platform, lift
the latch release on the safety prop handle at the front of the
machine. Lift the safety prop handle from the latch, pull and
manually position, engaging the safety prop. Lower the plat-
form until the safety prop rests on the cross member of the
arm below. Maintenance can now begin.
To store the safety prop, raise the platform, push the safety
prop handle so that the prop can be restored back to its
stowed position.
4.12 TIE DOWN/LIFT LUGS
Tie Down
When transporting the machine, the platform extensions
must be fully retracted and the platform fully lowered in the
stowed mode with the machine securely tied down to the
truck or trailer deck. Refer to the four tie down/lift lugs eyes.
Reference Figure 4-3., Lifting and Tie Down Chart (Sheet 2 of
2).
Lifting
If it becomes necessary to lift the machine, it is possible to do so
from the tie down/lift lugs. These lugs enable the machine to be
lifted using cranes or other suitable lifting devices.
NOTE: If lifting becomes necessary from the lifting lugs, JLG
Industries Inc. recommends the use of a proper spreader
bar to avoid damage to the machine.
Cranes or other lifting devices must be capable of han-
dling the weights listed in Section 6.
4.13 TOWING
It is not recommended that this machine be towed, except in
the event of an emergency such as a machine malfunction or
a total machine power failure. Refer to Section 6 for emer-
gency towing procedures.