Oshkosh Corporation JLG 3394RT, Руководство по эксплуатации и безопасности

Страница: 34 / 100

SECTION 3 - USER RESPONSIBILITIES AND MACHINE CONTROL
3121132 – JLG Lift – 3-3
Ground Control Station (See Figure 3-1)
DO NOT OPERATE FROM GROUND CONTROL STATION WITH PERSON-
NEL IN THE PLATFORM EXCEPT IN AN EMERGENCY.
PERFORM AS MANY PRE-OPERATIONAL CHECKS AND INSPECTIONS
FROM THE GROUND CONTROL STATION AS POSSIBLE.
NOTE: When the machine is shut down for overnight parking or
battery charging, the emergency stop and power select
switches must be positioned to off to prevent draining the
batteries.
1. Platform/Ground Control Switch (Power Select Switch)
A three position, key-operated power select switch sup-
plies operating power to the platform or ground con-
trols, as selected. When positioned to platform, the
switch provides power to the emergency stop switch at
the platform controls. When positioned to ground, the
switch provides power to the ground control. The
ground control emergency stop switch provides power
to the key switch. With the power select switch in the
center off position, power is shut off to both platform and
ground controls and the key can be removed to disable
the machine.
2. Glow Plug Switch - (Diesel Engine Only) - A momentary
contact, push button type switch that supplies electrical
power to the engine’s glow plugs, when depressed, to
assist cold starting. There is a 5 second default timer
that will not allow the start button to function before this
time has elapsed.
3. Circuit Breaker - The circuit breaker will open when
there is a short or overload on the machine.
4. Front Power Deck (If equipped) - A three position,
momentary contact switch provides power to the front
power deck. When activated, this switch will extend or
retract the front power deck.
5. Ignition/Emergency Stop Switch - A two-position, red,
mushroom-shaped ignition/emergency stop switch,
when positioned to ON with the power selector switch
positioned to ground, furnishes operating power to the
ground control station. In addition, the switch can be
used to turn off power to the function controls in the
event of an emergency. Power is turned on by pulling
the switch out (on), and is turned off by pushing the
switch in (off).
6. Rear Power Deck (If equipped) - A three position,
momentary contact switch provides power to the rear
power deck. When activated, this switch will extend or
retract the front power deck.