Oshkosh Corporation JLG 3394RT, Руководство по эксплуатации и безопасности

Страница: 55 / 100

SECTION 4 - MACHINE OPERATION
4-4 – JLG Lift – 3121132
Manual Level Adjustment (Trim)
NOTE: There is an override feature on the Leveling Jack system
that allows the operator to adjust (trim) the level of the
machine to the left or right when the platform is com-
pletely lowered. Use the following instructions to adjust
the level of the machine.
1. With the machine in the stowed position turn the power
on, start machine and depress the leveling jack selec-
tion switch located on the front of the platform control
box.
2. To adjust (trim) the machine to the right, activate the
steer switch on the top of the controller to the right until
the desired position is reached.
3. To adjust (trim) the machine to the left, activate the steer
switch on the top of the controller to the left until the
desired position is reached.
NOTE: Anytime the trim function is used there is a possibility that
the machine may become out of level. At this time the
machine will no longer lift but the machine can be low-
ered.
NOTE: The machine must be in the stowed position before the
trim function is operable.
NOTE: You can not adjust the level of the machine with the EASI-
CLADDER™ option installed.
Power Deck
The power deck is operated through a non proportional valve.
When operating the power deck from the platform controls,
select front deck extension, rear deck extension or both and
activate the joystick forward to extend and backward to
retract.
NOTE: There is a 5 second time out after the joystick is released.
If one extension is selected and released the opposite
deck extension cannot be selected for 5 seconds.
When operating the power deck from the ground control sta-
tion, activate and hold the auxiliary power switch, select, acti-
vate and hold the proper deck extension to be adjusted
(front or rear). If both decks are selected at the same time,
only the front deck will be active.
NOTE: The power deck extension switches function in the direc-
tion they are operated.
BE SURE AND RETRACT ANY POWER DECK BEFORE LOWERING
MACHINE.