Oshkosh Corporation JLG 1200SJP, Руководство по эксплуатации и безопасности

Страница: 49 / 168

SECTION 3 - MACHINE CONTROLS AND INDICATORS
31215054
3-11
8.
Glow Plug Indicator
Indicates the glow plugs are on. The glow
plugs are automatically turned on with the
ignition circuit and remain on for approxi
-
mately seven seconds. Start the engine only after the light
goes out.
9. Platform Overload Indicator
Indicates the platform has been overloaded.
10. Axles Set Indicator
Indicates the axles are fully extended. The indi -
cator will flash as the axles are extending or
retracting and be solid when fully extended.
The indicator icon will go out when the axles are fully
retracted.
11.
Wire Rope Service Indicator
When illuminated, the light indicates the wire
ropes are loose or broken and must be
repaired or adjusted prior to use.
12.
Engine Error Indicator
Indicates a fault with the engine and service is
required.
13. Boom Control System Warning Indicator
Indicates the platform is outside the operating
area and operation of certain boom functions
may be disabled (i.e. lift, telescope). Attempts
to use the disabled functions cause the indicator to flash and
an alarm to sound. Immediately return the platform to the
ground. If the indicator remains lit a boom control system
fault or failure has been detected. If a failure is discovered,
the system must be repaired by a JLG factory trained techni
-
cian before the machine can be used.
14.
Emissions Temperature Indicator
Indicator illuminates when the engine
emissions control sensor reaches a high
temperature.
!
!