Oshkosh Corporation JLG 1200SJP, Руководство по эксплуатации и безопасности

Страница: 162 / 168

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7-30
31215054
4.
Wheel nuts should be torqued before first road use and after
each wheel removal. Check and torque every 3 months or
150 hours of operation.
7.5 SUPPLEMENTAL INFORMATION ONLY APPLICABLE
TO CE MACHINES
The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC.
The A-Weighted emission sound pressure level at the work plat -
form is less than 70dB(A)
The guaranteed Sound Power Level (LWA) per European Directive
2000/14/EC (Noise Emission in the Environment by Equipment
for Use Outdoors) based on test methods in accordance with
Annex III, Part B, Method 1 and 0 of the directive, is 106 dB (A) for
machines equipped with Stage IIIA engines and 110dB (A) for
machines equipped with Stage IIIB engines.
The vibration total value to which the hand-arm system is sub -
jected does not exceed 2,5 m/s
2
. The highest root mean square
value of weighted acceleration to which the whole body is sub -
jected does not exceed 0,5 m/s
2
.
Table 7-16. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage 2nd Stage 3rd Stage
45 ft. lbs.
(60 Nm)
100 ft. lbs.
(140 Nm)
180 ft. lbs.
(252 Nm)