CAS40P 40 CFM / 100 PSIG
SECTION 4: INSTALLATION
PAGE - 13
®
An Oshkosh Corporation Company
4.1 MACHINE PACKAGE RECEIPT/
INSPECTION
Upon receipt of the machine package, inspect the
exterior of the shipping crate for signs of shipping/transit
damage. Any damage should be reported immediately to
the shipping company. Open the lid and inspect the
component parts and supports to ensure that there has
been no internal movements of assemblies or
components which may have caused damage. To install
the CAS40P compressor system, refer to the following
sections:
4.2 GENERAL INSTRUCTIONS
This section provides general guidance for locating and
preparing the CAS40P compressor package for
operation. Each installation is unique and can be affected
by location, ventilation, and other factors such as
electrical and hydraulic power supply availability and
location.
4.3 DETERMINING THE CAS40P UNIT
MOUNTING LOCATION
When determining the location to mount the CAS40P
unit, the following criteria must be taken into
consideration:
System Component Group
Manual Section
GENERAL INSTRUCTIONS
4.2
DETERMINING THE CAS40P UNIT
MOUNTING LOCATION
4.3
CONNECTING THE ELECTRICAL SUPPLY
4.4
HYDRAULIC SYSTEM REQUIREMENTS
4.5
CONNECTING THE HYDRAULIC SUPPLY
AND RETURN
4.6
CONNECTING THE AIR SUPPLY
4.7
SECTION 4:
INSTALLATION
WARNING
Install, operate, and maintain this
equipment in full compliance with all
applicable OSHA, other Federal, state,
local codes, standards, and regulations.
WARNING
DO NOT perform any modifications to
this equipment without prior factory
approval.
WARNING
DO NOT use plastic pipe, or incorrectly
rated piping or hose. Incorrectly rated
connection material can fail and cause
injury or equipment damage.
WARNING
DO NOT operate the compressor in
enclosed or confined spaces where
ventilation is restricted or closed off.
WARNING
Before performing maintenance or repair
operations on the compressor, ensure
that all power has been removed and
locked out to prevent accidental
application.
DO NOT assume that because the
compressor is in a STOPPED condition
that power has been removed.
Manual #99905382 Rev 02
(JUNE 2018)
