Operating instructions for Pool control-40.net filter control unit
Page: 21 (34)
Factory setting: filter speed
Frost protection
Press the button.
Use the
and
buttons to scroll through the menu until the
display shows "Frost protection".
Press the button to select the frost protection settings.
Operating
mode
Press the button.
The display shows the current operating mode for the frost
protection function (automatic mode or off). You can use the and
buttons to change the selection. Press the button to save the
setting.
Air temperature
Use the
and
buttons to scroll through the frost protection
settings until the display shown here appears.
Press the
button to use the
and
buttons to set the air
temperature at which frost protection will start operating. Press the
button to save the setting.
Adjustment range -5°C to +5°C, factory setting 0°C
Water
temperature
Use the
and
buttons to scroll through the frost protection
settings until the display shown here appears.
Press the
button to use the
and
buttons to set the target
water temperature for frost protection. Press the
button to save
the setting.
Adjustment range 0°C to 20°C, factory setting 5°C
Backwashing
Press the button.
Use the
and
buttons to scroll through the menu until the
display shows "backwashing".
Press the
button to select the settings for backwashing using
slide valves.
Operating
mode
Press the button to set the backwash start condition using the
and buttons.
The following options can be set:
Press the button to start backwashing immediately.
Press the button to start backwashing under timer control. Press
the button to save the setting.
Timer
Use the and buttons to scroll through the backwashing settings
until the display shown here appears.
Press the
button to program the timer settings (see Procedure
described under Timer programming).
Stop
backwashing
Press the button to switch off the control unit. This terminates the
backwash cycle.
Backwash
period
Use the and buttons to scroll through the backwashing settings
until the display shown here appears.
Press the button to use the and buttons to set how long the
backwash cycle should last. Press the button to save the setting.
Adjustment range 0 to 900s, factory setting 300s
Rinse period
Use the and buttons to scroll through the backwashing settings
until the display shown here appears.
Press the button to use the and buttons to set how long the
rinse cycle should last. Press the button to save the setting.
Adjustment range 0 to 120s, factory setting 30s