Operating instructions for Pool control-40.net filter control unit
Page: 17 (34)
pass without any button being pressed when making the setting,
programming is aborted without any settings being saved. The
normal operation display reappears.
Timer
programming
Use this button to program the built-in timer. Note that the switch-on time
and the associated switch-off time must always be entered as a pair:
1. Press the
button
⇒
the display shows
. The
bottom line shows the currently set switch-on and switch-off times
(Dy means daily). The number in the top right indicates the number
of the pre-programmed timer setting (01 means 1st timer setting).
2. Press the button. The day of the week flashes.
3. Use the and buttons to select whether you want to set the day,
hour or minutes. The relevant text flashes.
4. Use the
and
buttons to make the setting for the currently
flashing text (day, hour or minutes). ON in the top line means
switch-on time.
5. Press the button to save the timer setting.
6. The display automatically shows the menu for setting the switch-off
time. The day of the week flashes.
7. Use the and buttons to select whether you want to set the day,
hour or minutes. The relevant text flashes.
8. Use the
and
buttons to make the setting for the currently
flashing text (day, hour or minutes). OFF in the top line means
switch-off time.
9. Press the button to save the timer setting.
10. Repeat steps 1-9 if you wish to program further timer settings.
Changing the timer settings
Pre-programmed timer settings can be changed as follows:
1. Press the
button
⇒
the display shows
. The
bottom line shows the currently set switch-on and switch-off times
(Dy means daily).
2. If more than one timer setting is programmed, you can use the
and
buttons to select the timer setting you require. (Check the
number in the top right).
3. Press the button. The day of the week flashes.
4. Use the
and
buttons to select whether you want to alter the
day, hour or minutes. The relevant text flashes.
5. Use the
and
buttons to change the setting for the currently
flashing text (day, hour or minutes).
6. Press the button to save the changes.
Clearing the timer settings
Pre-programmed timer settings can be cleared as follows:
1. Press the
button
⇒
the display shows
. The
bottom line shows the currently set switch-on and switch-off times
(Dy means daily).
2. If more than one timer setting is programmed, you can use the
and
buttons to select the timer setting you require. (Check the
number in the top right)
3. Press the button. The day of the week flashes.
4. Use the
and
buttons to change the setting for the currently
flashing text. To clear the setting, select "not progr." (short for "not
programmed").
