Operating instructions PC-30-Vario filter control unit Page: 6
Connecting a Speck ECO-VS pump
A Speck ECO-VS pump can be connected directly to the
PC-30-Vario unit. Connect the speed controller to
terminals 15-23.
A separate mains power supply must be provided for the
pump. The power supply cannot be provided by the PC-
30-Vario.
There must be a link inserted between the two WPS
terminals (winding protection switch).
Always refer to the operating instructions for the pump.
In the Setup menu on the pump, the digital inputs must be set to "dI" and the switching behaviour
for the Stop function must be set to Stop when contact open ("oP").
Connecting a Speck Badu-90-ECO-Motion pump
A Speck Badu-90-ECO-Motion pump can be connected
directly to the PC-30-Vario unit. Connect the speed
controller to terminals 15-23.
A separate mains power supply must be provided for the
pump. The power supply cannot be provided by the PC-
30-Vario.
There must be a link inserted between the two WSK
terminals (winding protection switch).
Always refer to the operating instructions for the pump.
In the Setup menu on the pump, the external control must be enabled for "digital fixed speeds"
with the signal type "continuous signal". The speeds required for ECO mode, normal mode and
backwash mode must be set for the speeds N1, N2 and N3.
