Operating instructions PC-30-Vario filter control unit Page: 13
pressed during an interval of more than 10 seconds when setting the
temperature, the last temperature selected is saved automatically and the
standard operating display reappears.
ECO temperature selection
Use the button to select the reduction in temperature for ECO mode:
1. Press the button twice
the display shows
3.0
ECO
descent
°C
(
scrolling text)
2. You can now use the
and
buttons to set the temperature reduction you
require in a range of 0°C to 15°C.
3.
To save the required temperature, press the
button again. If no button is
pressed during an interval of more than 10 seconds when setting the
temperature, the last temperature selected is saved automatically and the
standard operating display reappears.
Time setting
Use the button to set the current time:
1. Press the
button
the display shows
Sa 14:46
Time
and the minute display
flashes
.
2. You can now use the
and buttons to set the minutes.
3. Press the button
the hour display flashes.
4. You can now use the
and buttons to set the hour.
5. Press the button
the day of the week flashes.
6. You can now use the
and buttons to set the day of the week.
To save the set time, press the
button again. If no button is pressed during an
interval of more than 10 seconds when setting the time, the last time displayed is
saved automatically and the standard operating display reappears.
Timer programming
Use the
button to program the built-in timer. Note that the switch-on time and
the associated switch-off time must always be entered as a pair:
1. Press the
button
the display shows
-----
1.
if a switching time has
not been programmed yet.
2. After pressing either button
or
, or if a switching time has been pre-
programmed, the display shows
0:00
0:00
1.
and the minutes in the top time
display flash (switch-on time).
Note: you can press the button to adopt the current time.
3. You can now use the
and
buttons to set the minutes for the switch-on
time you require.
4. Press the button again
the hour for the switch-on time flashes
5. You can now use the
and
buttons to set the hour for the switch-on time
you require.
6. Press the button again
the minutes for the switch-off time flash
7. You can now use the
and
buttons to set the minutes for the switch-off
time you require. Note: you can press the
button to adopt the current time;
