PC-250 Filter control unit operating manual Page: 7 (24
Setting the time
Use the key to set the current time:
1. Press the
key
the display shows
Sa 14:46
Uhrzeit
, the minute display
blinks.
2. You can now use the and keys to set the minutes.
3. Press the key
the hour display blinks.
4. You can now use the and keys to set the hours.
5. Press the key
the weekday display blinks.
6. You can now use the and keys to set the weekday.
Press the key again to save the time. If no key is pressed for more than
10 seconds during setting, the last time displayed is saved automatically
and the normal operating display will be shown again.
Programming the timer
Use the key to program the built-in timer, whereby the switch-on time and
the associated switch-off time must always be entered as pairs.
1. Press the
key
the display shows
-----
1.
if no switching time
has yet been programmed.
2. If you press one of the or keys, or if a switching time has already
been programmed, the display shows
0:00
0:00
1.
, the minute display of
the top time (switch-on time) blinks. Note: if you press the
key, the
current time will be taken over.
3. You can now use the and keys to set the required switch-on time
minutes.
4. Press the key again
the hours in the switch-on time blink
5. You can now use the and keys to set the required switch-on time
hours.
6. Press the key again
the minutes in the switch-off time blink
7. You can now use the and keys to set the required switch-off time
minutes. Note: if you press the
key, the current time can be taken
over, if you press the
and
keys simultaneously the switch-on time
set previously will be taken over.
8. Press the key again
the hours in the switch-off time blink
9. You can now use the and keys to set the required switch-off time
hours.
10. Further switching times can now be programmed as in points 1-9.
11. Press the key again to save the switching time. If no key is pressed
for more than 10 seconds during setting, the last switching time
displayed is saved automatically and the normal operating display will
be shown again.
Delete rinsing time:
If switching times have already been programmed, you can use the
key
