1. Purpose
The PIROUT-R detector (hereinafter referred to as the “detector”) is designed to detect a pene-
tration into the space around the protected objects and transmit this events to the Lun-R receiver
that is connected to the Lun control panel (more about for compatibility, see the documentation of
the relevant control panel).
Product is not equipped with built-in cameras and microphones, devices and units for
hidden video and audio recording.
2. Safety Precautions
Only the employees, familiar with the module design, instructed on the safety arrangements
shall be allowed to install, routinely maintain and repair.
The device does not have open live parts, representing the danger of electric shock to a per-
son. No safety ground.
3. Technical specifications
The detector technical characteristics is shown in the Table 1.
Table 1. Technical characteristics
Characteristic
Value
Operating frequency range (depends of modification), MHz
433.05…434.79 or
868.70…869.20
Power radiated by the transmitter, mW
up to 10
The health test signals period, seconds
60
Installation height, m
2…3
The angle of the detection zone in the horizontal plane
90º
Maximum range with installed/removed jumper
SENS HIGH
, m
12/8
Detectable speeds range, m/s
0.3…3
Main and backup power source type
CR123A battery
Battery voltage, V
2.2…3.2
The battery predicted service life, years
up to 5
Degree of protection provided by enclosure
IP54
Dimensions, mm
180*75*80
Weight, g
200
The detector detection zone diagram is shown in Figure 2.
PIROUT-R
Version en_2
3
