INSTALLATION MANUAL / USER MANUAL
REMOTE CONTROL PANEL RC102
PAGE: 8
JUL 18/2022
© 2022 Orolia S.A.S. All rights are strictly reserved.
5. Working mode
A. Controls
The following elements are to be found on the RC102 remote control
panel:
1. a 3-position switch (ON, ARMED, RESET & TEST);
2. a red or white visual indicator.
Figure 5: RCP controls
The visual indicator gives an indication on the working mode of the ELT:
- After the self-test:
• one long flash indicates that the system is operational and that no
error were found;
• a series of short flash indicates the test has failed.
- In operation mode:
• periodic flashes during 121.5 transmissions;
• long flash during 406 transmission.
1
2
