Orolia EdgeSync, Руководство пользователя

Страница: 39 / 78

orolia.com EdgeSync Manual rev 1 | 39
Oscillator RO OCXO 4 hours or OCXO 8 hours
GNSS Receiver RO GNSS Receiver information
Timing Engine FW
Version
RO Version of firmware that is running on the Orolia’s internal
Managed Clock Engine
Timing Engine FPGA
Version
RO Version of FPGA that is running on the Orolia’s internal
Managed Clock Engine
MAC Address RO MAC address of port 1
Serial Number RO Serial number
System Up Time RO Time since last reboot
Software Upgrade
From Local File button RW Browser button to navigate through the Host PC where the
browser is running to select previously downloaded EdgeSync
software
Protocol pull-down
option
RW Only SFTP option is supported. Note, the i mage file is expected
to be in the home directory on SFTP server
Server IP RW IPv4 address of SFTP server
SW Image Filename RW Software file to be used for the upgrade
Server Login
Username
RW Login credentials for SFTP server
Server Password RW Login credentials for SFTP server
Start SW Upgrade
button
WO Clicking the button initiates upgrade process
Clear button WO Click to clear the latest changes
Software Upgrade
Status
RO Display bar to show the upgrade progress
System Logs
Download WO Download the EdgeSync MCE Event Log to the Host PC. The
log file is encrypted and is for Orolia use.
System Power
Reboot button WO Reboot the EdgeSync system
Shutdown button WO Shutdown of the EdgeSync in controlled and sequential steps
that will protect the EdgeSync memory storage. Using this
button is recommended prior to disconnecting physical power
to the EdgeSync.
Table 16 System Options
IMPORTANT NOTE ON SOFTWARE UPGRADE:
Stopping the Engine is recommended before doing the software upgrade
SNMP Tab
SNMP Tab – Provides SNMP (v2, v3) Management Server configuration.