Orolia EdgeSync Скачать руководство пользователя страница 12

Страница: 12 / 78

12 | EdgeSync Manual rev 1

orolia.com

Getting Started

This chapter describes on how the user can start using EdgeSync system after installing EdgeSync

device and making the necessary connections to the various hardware interfaces.

Logging in with the console

Log into EdgeSync using the mini-USB console. Default set-up is 115200 baud, 8 bits, no parity, and one

stop bit. Login is admin and password are admin. Terminal emulation software like Tera Term, PuTTY,

minicom and Procomm can be used for this purpose.

Set up IP address

The Management port IP address assigned to the EdgeSync can be viewed using the mini-USB console.

At the factory, the EdgeSync Management port IP is statically assigned to 192.168.2.100 with netmask

of 255.255.255.0. This static IP address will be set after doing a restore to factory default configuration.

To configure the Management port IP address for customer network:

Connect the EdgeSync mini-USB console port to a PC and run a terminal emulator application

(Tera Term, PuTTY, minicom, Procomm, etc.) to login to the EdgeSync. Login credentials are

provided in the EdgeSync Basic Commands section. Use the “network configure” command to

configure the Management port IP parameters. The Network Configure Command section

provides CLI command details for setting the Management port IP address, subnet mask and

Gateway IP.

With the Management port IP address configured successfully, the IP address can be entered

into a browser URL field to access the EdgeSync Login page, with login credentials

(admin/admin).

Remote Network Access to EdgeSync

EdgeSync can be accessed remotely over IP network via the Management IP Interface. These are some

of the methods to access EdgeSync remotely:

HTTP/Web access

EdgeSync can be accessed over the web from any standard browser (IE, Chrome, Firefox, Safari, etc.).

This provides a Graphical User Interface (GUI) for the user to configure or monitor EdgeSync

operations.

The following web browsers / versions are supported by the EdgeSync HTTP server:

•

Internet Explorer / v11.0.31

•

Chrome / v63.0.3239.132

•

Firefox / v56.0

•

Safari / v11.0.3

Содержание EdgeSync















































































Результаты поиска

Содержание EdgeSync

Отзывы:

Бренды по названию

Популярные бренды

Orolia EdgeSync, Руководство пользователя

Результаты поиска

Содержание EdgeSync

Отзывы:

Бренды по названию

Популярные бренды