Ormazabal cgm.3 system Series Скачать руководство пользователя страница 22

Страница: 22 / 88

IG-183-EN version 06; 31/03/2020

Installation

General instructions

cgm

.3 system: medium voltage SF

gas-insulated

cubicles up to 38 kV according to IEEE and CSA standards

4. Installation

4.1. Unpacking the equipment

cgm

.3 system cubicles come wrapped in protective plastic.

On receiving the equipment, check that the goods supplied

correspond to the order and associated documentation.

The procedure for unpacking the equipment is as follows:

Using a blade, cutter or similar tool, cut the cellophane

the cubicle is wrapped in.

It is advisable to cut the cellophane at the rear of the

cubicle or at the corner to avoid scratching the surface.

Remove the cellophane.

Detach the white polystyrene corner pieces.

Unscrew the fixings between the base and the pallet.

Remove the pallet, handling the cubicle as indicated in

section 2.1.

Unpack the documentation and accessories box

located at the bottom rear section or on the roof of the

cubicle, depending on the cubicle model.

Remove the self-adhesive protective plastic from the

cable compartment cover.

Dispose of any waste in an environmentally-friendly

manner.

It is advisable to make a visual inspection of the equipment

to check whether it has suffered any damage in transit. If so,

contact

Ormazabal

immediately.

The self-adhesive plastic must be removed from the

cable compartment cover so that the equipment

enclosure’s ground connection may have the proper

electrical continuity.

Содержание cgm.3 system Series

























































































Результаты поиска

Содержание cgm.3 system Series

Отзывы:

Похожие инструкции для cgm.3 system Series

Бренды по названию

Популярные бренды

Ormazabal cgm.3 system Series, Общее руководство по инструкции

Результаты поиска

Содержание cgm.3 system Series

Отзывы:

Похожие инструкции для cgm.3 system Series

Бренды по названию

Популярные бренды