ORiNG TGAP-620-M12 Series страница 2 Скачать руководство пользователя

Страница: 2 / 45

TGAP-620-/6620-M12 Series User Manual

ORing Industrial Networking Corp

COPYRIGHT NOTICE

No part of this publication may be reproduced in any form without the prior written consent of

ORing Industrial Networking Corp.

TRADEMARKS

is a registered trademark of ORing Industrial Networking Corp.

All other trademarks belong to their respective owners.

REGULATORY COMPLIANCE STATEMENT

Product(s) associated with this publication complies/comply with all applicable regulations.

Please refer to the Technical Specifications section for more details.

WARRANTY

ORing warrants that all ORing products are free from defects in material and workmanship

for a specified warranty period from the invoice date (5 years for most products). ORing will

repair or replace products found by ORing to be defective within this warranty period, with

shipment expenses apportioned by ORing and the distributor. This warranty does not cover

product modifications or repairs done by persons other than ORing-approved personnel, and

this warranty does not apply to ORing products that are misused, abused, improperly

installed, or damaged by accidents.

Please refer to the Technical Specifications section for the actual warranty period(s) of the

product(s) associated with this publication.

DISCLAIMER

Information in this publication is intended to be accurate. ORing shall not be responsible for

its use or infringements on third-parties as a result of its use. There may occasionally be

unintentional errors on this publication. ORing reserves the right to revise the contents of this

publication without notice.

CONTACT INFORMATION

ORing Industrial Networking Corp.

3F., No.542-2, Zhongzheng Rd., Xindian Dist., New Taipei City 23148, Taiwan (R.O.C.)

Tel: +886-2-2218-1066 // Fax: +886-2-2218-1014

Website:

www.oring-networking.com

Technical Support

E-mail:

[email protected]

Sales Contact

E-mail:

[email protected]

(Headquarters)

[email protected]

(China)

Содержание TGAP-620-M12 Series














































Результаты поиска

Содержание TGAP-620-M12 Series

Отзывы:

Похожие инструкции для TGAP-620-M12 Series

Бренды по названию

Популярные бренды

ORiNG TGAP-620-M12 Series, Руководство пользователя

Результаты поиска

Содержание TGAP-620-M12 Series

Отзывы:

Похожие инструкции для TGAP-620-M12 Series

Бренды по названию

Популярные бренды