TGAP-620-/6620-M12 Series User Manual
ORing Industrial Networking Corp
27
the network must be set to the same channel to communicate on the
network. (
Wireless channel must be the same as the other device
in the group
)
WDS-Master Mode
A WDS master is the central control point for authenticating wireless
clients, caching client key material, distributing MFP key material,
reporting radio management information to an upstream network
management station, and updating other APs participating in WDS.
You can set the device as the WDS-master by selecting from the list.
Security options
You can choose the security type for your WLAN connection from the
following options:
None
: no encryption
WEP
: WEP (Wired Equivalent Privacy) is a wireless security protocol
for WLAN. WEP will encrypt data transmitted on the WLAN.
WPA/WPA2 Personal
: uses a pre-shared key for authentication.
This pre-shared key is then dynamically sent between the AP and
clients. Each authorized computer is given the same pass phrase.
Peer AP SSID
Enter the SSID of the AP you want to connect as a client
Peer AP BSSID
Enter the BSSID (Wireless MAC address) to limit client target
Slave Mode
Enables or disables slave mode
Site Scan
You can scan APs on the network using this mode.
Security Type
Select the security type used by the client you want to connect
Client Mode
In this mode, the AP functions as a wireless client to connect your wired devices to a wireless
network. This mode provides no access point services but supports 802.1X.
