RES-P3242GCL SERIES User’s Manual
82
stp-path-priority
[Port Priority]
I
Use the spanning-tree
port-priority interface
configuration
command to configure
a port priority that
is used when two
switches tie for
position as the root
switch.
switch(config)#interface fastEthernet
2
switch(config-if)# stp-path-priority
127
stp-admin-p2p
[Auto|True|False]
I
Admin P2P of STP
priority on this
interface.
switch(config)#interface fastEthernet
2
switch(config-if)# stp-admin-p2p
Auto
stp-admin-edge
[True|False]
I
Admin Edge of STP
priority on this
interface.
switch(config)#interface fastEthernet
2
switch(config-if)# stp-admin-edge
True
stp-admin-non-stp
[True|False]
I
Admin NonSTP of
STP priority on this
interface.
switch(config)#interface fastEthernet
2
switch(config-if)# stp-admin-non-stp
False
Show spanning-tree
E
Display a summary of
the spanning-tree
states.
switch>show spanning-tree
no spanning-tree
G
Disable spanning-tree. switch(config)#no spanning-tree
5.7 Commands Set List—QoS command set
Commands
Level Description
Example
qos policy
[weighted-fair|strict]
G
Select QOS
policy
scheduling
switch(config)#qos
policy weighted-fair
qos 8021p-prioritytype
[port-based|cos-only|tos-only|cos-first|tos-first]
G
Setting of
QOS priority
type
switch(config)#qos
prioritytype