ORiNG RES-P3242GCL SERIES, Руководство пользователя

Страница: 82 / 101

RES-P3242GCL SERIES User’s Manual
75
function
security enable G
Enable IP security
function
switch(config)#security enable
security http G
Enable IP security of
HTTP server
switch(config)#security http
security telnet G
Enable IP security of
telnet server
switch(config)#security telnet
security ip
[Index(1..10)] [IP
Address]
G
Set the IP security list switch(config)#security ip 1
192.168.1.55
show security P
Show the information
of IP security
switch#show security
no security G
Disable IP security
function
switch(config)#no security
no security http G
Disable IP security of
HTTP server
switch(config)#no security http
no security telnet G
Disable IP security of
telnet server
switch(config)#no security telnet
5.3 Commands Set List—Port Commands Set
Commands
Le
vel
Description Example
interface
fastEthernet
[Portid]
G
Choose the port for modification. switch(config)#interface
fastEthernet 2
duplex
[full | half]
I
Use the duplex configuration
command to specify the duplex mode
of operation for Fast Ethernet.
switch(config)#interface
fastEthernet 2
switch(config-if)#duplex full
speed
[10|100|1000|a
uto]
I
Use the speed configuration
command to specify the speed mode
of operation for Fast Ethernet., the
speed can’t be set to 1000 if the port
isn’t a giga port..
switch(config)#interface
fastEthernet 2
switch(config-if)#speed 100
flowcontrol
mode
[Symmetric|As
I
Use the flowcontrol configuration
command on Ethernet ports to control
traffic rates during congestion.
switch(config)#interface
fastEthernet 2
switch(config-if)#flowcontrol mode