RES-P3242GCL SERIES User’s Manual
77
state
[Enable |
Disable]
I
Use the state interface configuration
command to specify the state mode of
operation for Ethernet ports. Use the
disable form of this command to
disable the port.
switch(config)#interface
fastEthernet 2
switch(config-if)#state Disable
show interface
configuration
I
show interface configuration status
switch(config)#interface
fastEthernet 2
switch(config-if)#show interface
configuration
show interface
status
I
show interface actual status
switch(config)#interface
fastEthernet 2
switch(config-if)#show interface
status
show interface
accounting
I
show interface statistic counter
switch(config)#interface
fastEthernet 2
switch(config-if)#show interface
accounting
no accounting
I
Clear interface accounting information switch(config)#interface
fastEthernet 2
switch(config-if)#no accounting
5.4 Commands Set List—Trunk command set
Commands
Level
Description
Example
aggregator priority
[1to65535]
G
Set port group system
priority
switch(config)#aggregator priority 22
aggregator activityport
[Port Numbers]
G
Set activity port
switch(config)#aggregator
activityport 2
aggregator group
[GroupID] [Port-list]
lacp
workp
[Workport]
G
Assign a trunk group
with LACP active.
[GroupID] :1to3
[Port-list]:Member port
list, This parameter
switch(config)#aggregator group 1
1-4 lacp workp 2
or
switch(config)#aggregator group 2
1,4,3 lacp workp 3