RES-P3242GCL SERIES User’s Manual
1
R.M LED for Ring master. When the LED light on, it means that the switch is the ring
master of O-Ring.
Ring LED for Ring. When the LED light on, it means the O-Ring is activated.
Fault LED for Fault Relay. When the fault occurs, the amber LED will be light on.
3. RS-232 Console Port. Set connection at 9600bps, 8N1.
4. 10/100Base-T(X) Ethernet ports.
5. LED for Ethernet ports Link status.
6. LED for Ethernet ports ACT status.
7. LED for Combo SFP ports Link / ACT status.
8. 1000Base-X fiber port in SFP socket.
9. 10/100/1000Base-T(X) Ethernet port.
10. LED for Combo Copper ports Link / ACT status.
11. LED Status
P1 LED for PWR1. When the PWR1 links, the green led will be light on.
P2 LED for PWR2. When the PWR2 links, the green led will be light on.
Status LED for System Status. When the system is ready, the green led will be light on.
R.M LED for Ring master. When the LED light on, it means that the switch is the ring
master of O-Ring.
Ring LED for Ring. When the LED light on, it means the O-Ring is activated.
Fault LED for Fault Relay. When the fault occurs, the amber LED will be light on.
12. LED for Combo SFP ports Link / ACT status.
13. LED for Combo Copper ports Link / ACT status.
2.2 Power Panel
RES-P3242GCL SERIES are power redundant switches, supports two power inputs.
Note :
RLY COM– Relay Com
RLY NO – Relay Normal Open
RLY NC – Relay Normal Close