ORiNG IES-3062 Series Скачать руководство пользователя страница 49

Страница: 49 / 107

IES-3080 / IES-3062 SERIES User’s Manual

ORing Industrial Networking Corp

Port

Select the port to configure.

Link type

There are 3 types of link type:

Access Link:

single switch only,

allows you to group ports by

setting the same VID.

Trunk Link:

extended application of

Access Link

, allows you

to group ports by setting the same VID with 2 or more

switches.

Hybrid Link:

Both

Access

Link

and

Trunk Link

are available.

Hybrid(QinQ) Link:

enable QinQ mode

，

allow you to insert

one more VLAN tag in a original VLAN frame.

Untagged VID

Set the port default VLAN ID for untagged devices that

connect to the port. The range is 1 to 4094.

Tagged VIDs

Set the tagged VIDs to carry different VLAN frames to other

switch.

Apply

Click “

Apply

” to set the configurations.

5.1.4.2 VLAN Setting – Port Based

Packets can go among only members of the same VLAN group. Note all unselected ports

are treated as belonging to another single VLAN. If the port-based VLAN enabled, the

VLAN-tagging is ignored.

VLAN Configuration – Port Base interface-1

Содержание IES-3062 Series












































































































Результаты поиска

Содержание IES-3062 Series

Отзывы:

ORiNG IES-3062 Series, Руководство пользователя, Страница: 49 / 107

Результаты поиска

Содержание IES-3062 Series

Отзывы: