ORiNG IES-3062 Series Скачать руководство пользователя страница 33

Страница: 33 / 107

IES-3080 / IES-3062 SERIES User’s Manual

ORing Industrial Networking Corp

priority will be the active port. 1st Priority is the highest.

Apply

Click “

Apply

” to activate the configurations.

5.1.1.5 RSTP

The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree Protocol. It

provides faster spanning tree convergence after a topology change. The system also

supports STP and the system will auto detect the connected device that is running STP or

RSTP protocol.

RSTP setting

You can enable/disable RSTP function, and set parameters for each port.

RSTP Setting interface

The following table describes the labels in this screen.

Label

Description

RSTP mode

You must enable or disable RSTP function before configuring

the related parameters.

Priority (0-61440)

A value used to identify the root bridge. The bridge with the

lowest value has the highest priority and is selected as the

root. If the value changes, You must reboot the switch. The

value must be multiple of 4096 according to the protocol

standard rule.

Max Age Time(6-40)

The number of seconds a bridge waits without receiving

Spanning-tree Protocol configuration messages before

attempting a reconfiguration. Enter a value between 6

through 40.

Содержание IES-3062 Series












































































































Результаты поиска

Содержание IES-3062 Series

Отзывы:

ORiNG IES-3062 Series, Руководство пользователя, Страница: 33 / 107

Результаты поиска

Содержание IES-3062 Series

Отзывы: