ORiNG IES-3062 Series Скачать руководство пользователя страница 32

Страница: 32 / 107

IES-3080 / IES-3062 SERIES User’s Manual

ORing Industrial Networking Corp

Label

Description

Enable

Check this box to enable RSTP-Repeater.

Ring Port

Choosing the port which connect to the RSTP

Ring Port

Choosing the port which connect to the RSTP

Edge Port

Only the edge device (connected to RSTP device) needs to

specify edge port. The user must specify the edge port according

to topology of network.

5.1.1.4 Fast Recovery

The Fast Recovery Mode can be set to connect multiple ports to one or more switches.

The IES-3080/3062 SERIES with its fast recovery mode will provide redundant links. Fast

Recovery mode supports 8 priorities, only the first priority will be the act port, the other ports

configured with other priority will be the backup ports.

Fast Recovery Mode interface

The following table describes the labels in this screen.

Label

Description

Active

Activate the fast recovery mode.

port

Port can be configured as 8 priorities. Only the port with highest

Содержание IES-3062 Series












































































































Результаты поиска

Содержание IES-3062 Series

Отзывы:

ORiNG IES-3062 Series, Руководство пользователя, Страница: 32 / 107

Результаты поиска

Содержание IES-3062 Series

Отзывы: