ORiNG IES-3062 Series Скачать руководство пользователя страница 11

Страница: 11 / 107

IES-3080 / IES-3062 SERIES User’s Manual

ORing Industrial Networking Corp

IES-3062FX & IES-3062GFX

1. LED for PWR1. When the PWR1 links, the green led will be light on.

2. LED for PWR2. When the PWR2 links, the green led will be light on.

3. LED for PWR3. When the PWR3 links, the green led will be light on.

4. LED for R.M (Ring master). When the LED light on, it means that the switch is the ring

master of O-Ring.

5. LED for Ring. When the led light on, it means the O-Ring is activated.

6. LED for Fault Relay. When the fault occurs, the amber LED will be light on.

7. Console port (RJ-45).

8. Reset button. Push the button 3 seconds for reset; 5 seconds for factory default.

9. 10/100Base-T(X) Ethernet ports..

10. LED for Ethernet ports Collision/Duplex status.

11. LED for Ethernet ports Link/Act status.

12. 100Base-FX / 1000Base-X Fiber port.

13. LED for fiber port Link/Act status.

Содержание IES-3062 Series












































































































Результаты поиска

Содержание IES-3062 Series

Отзывы:

ORiNG IES-3062 Series, Руководство пользователя, Страница: 11 / 107

Результаты поиска

Содержание IES-3062 Series

Отзывы: