Orientalmotor OPX-2A, Руководство по эксплуатации

Страница: 35 / 44

9 Test mode
−
35
−
9.4 JOG operation
You can operate the motor using the keys on the
OPX-2A
. The operating speed corresponds to the value
set in the “Jog operating speed” parameter [APP-2-06].
Take note that when the value set in the “Jog starting speed” parameter [APP-2-08] is greater than the
value set in the “Jog operating speed” parameter [APP-2-06], the Jog starting speed will become
effective.
Jog operating speed
[APP-2-06]
Jog starting speed
[APP-2-08]
Jog acceleration (deceleration) rate
[APP-2-07]
Note
During JOG operation, the motor rotates at the specified operating speed while each
applicable key is pressed. Before commencing JOG operation, consider the status of
the equipment and condition of its surroundings to confirm thoroughly that motor
rotation will not cause any dangerous situations.
Operation is in progress
Top screen of JOG operation
Pressing once causes the motor to rotate one
step in the - direction.
Pressing and holding the key causes the motor
to rotate continuously in the - direction.
Pressing once causes the motor to rotate one
step in the + direction.
Pressing and holding the key causes the motor
to rotate continuously in the + direction.
9.5 Positioning operation
Select a desired operation data number and then press the
key, and positioning operation will be
performed.
Note
During positioning operation, the motor rotates at the specified operating speed.
Before commencing positioning operation, consider the status of the equipment and
condition of its surroundings to confirm thoroughly that motor rotation will not cause
any dangerous situations.
Operation is in progress
(blinking display)
Top screen of positioning
operation
Operation data No.
selection 1
Operation data No.
selection 63
through the items.
Use to navigate