Orientalmotor OPX-2A, Руководство по эксплуатации

Страница: 3 / 44

1 Safety precautions
−
3
−
1 Safety precautions
The precautions described below are intended to prevent danger or injury to the user and other personnel
through safe, correct use of the product. Use the product only after carefully reading and fully
understanding these instructions.
Also read the “Safety precautions” sections in the operating manuals that came with the product you are
combining with the
OPX-2A
.
Warning
Handling the product without observing the instructions that accompany a
“Warning” symbol may result in serious injury or death.
Caution
Handling the product without observing the instructions that accompany a
“Caution” symbol may result in injury or property damage.
Note Note
The items under this heading contain important handling instructions that
the user should observe to ensure safe use of the product.
Warning
General
•
Do not use the product in explosive or corrosive environments, in the presence of flammable gases,
locations subjected to splashing water, or near combustibles. Doing so may result in fire, electric shock
or injury.
•
Assign qualified personnel the task of installing, wiring, operating/controlling, inspecting and
troubleshooting the product. Failure to do so may result in fire, electric shock or injury.
•
When the driver’s protection function is triggered, first remove the cause and then clear the protection
function. Continuing the operation without removing the cause of the problem may cause malfunction
of the motor and driver, leading to injury or damage to equipment.
Repair, disassembly and modification
•
Do not disassemble or modify the data setter. This may cause electric shock or injury. Refer all such
internal inspections and repairs to the branch or sales office from which you purchased the product.
Caution
General
•
Do not use the motor, gearhead and driver beyond their specifications, or electric shock, injury or
damage to equipment may result.
Operation
•
Provide an emergency stop device or emergency stop circuit external to the equipment so that the
entire equipment will operate safely in the event of a system failure or malfunction. Failure to do so
may result in injury.
Disposal
•
To dispose of the data setter, disassemble it into parts and components as much as possible and dispose
of individual parts/components as industrial waste.