Safety precautions
6
•
Do not use the motorized linear slide beyond its specifications. Doing so may result in electric shock,
injury or damage to equipment.
•
Keep your fingers and objects out of the openings in the motorized linear slide. Failure to do so may
result in fire, electric shock or injury.
•
Do not touch the motorized linear slide while operating or immediately after stopping. Doing so may
result in a skin burn(s).
•
Do not carry the motorized linear slide by holding its cables or its moving part. Doing so may cause
injury.
•
Keep the area around the motorized linear slide free of combustible materials. Failure to do so may
result in fire or a skin burn(s).
•
Do not leave anything around the motorized linear slide that would obstruct ventilation. Doing so may
result in damage to equipment.
•
Do not touch the moving part during operation. Doing so may result in injury.
•
Do not touch the terminals while conducting the insulation resistance measurement or the dielectric
strength test. Accidental contact may result in electric shock.
•
Do not use our sensor set as safety components. Doing so may result in injury or damage to
equipment.
•
Use a motorized linear slide and driver only in the specified combination. An incorrect combination
may cause a fire.
•
The motorized linear slide is very heavy. When transporting or installing the motorized linear slide,
make sure two persons work together to carry out the necessary tasks. Failure to do so may result in
injury.
•
Wear a helmet, safety shoes, gloves or other protective gear when transporting or installing the
motorized linear slide. Failure to do so may result in injury.
•
When replacing a motor, use the motor whose model name is the same as the one mounted at the
time of shipment. If a motor being different from the one at the time of shipment is mounted, the
specifications cannot be satisfied, and, in addition, damage to equipment or injury may result.
•
The motor surface temperature may exceed 70 °C (158 °F) even under normal
operating conditions. If the operator is allowed to approach the motorized linear
slide in operation, affix a warning label shown in the figure on a conspicuous
position. Failure to do so may result in a skin burn(s)
Warning label
