Maintenance
33
6. Loosen the tension adjustment screws.
When loosening the screws, tension of the belt will be
adjusted properly by the strength of springs.
Three turns or less
To prevent the tension adjusting screws from falling off, keep three turns or less when turning the
screw.
7. Tighten the motor mounting screws with pressing the
motor in the direction of arrow so that the motor does not
tilt.
Model
Tightening torque
EZSM3
,
EZSM4
1 N•m (142 oz-in)
EZSM6
2.4 N•m (340 oz-in)
8. Tighten the tension adjustment screws.
Model
Tightening torque
EZSM3
,
EZSM4
1 N•m (142 oz-in)
EZSM6
2.4 N•m (340 oz-in)
9. Attach the pulley cover, and tighten the screws.
Tightening torque: 1 N•m (142 oz-in)
10. After mounting the motor, set the home again.
If the motor for the motorized linear slide equipped with the
AZ
Series was replaced, set the home again after
restoring with the recovery data file.
