Preparation
9
▐
4
Preparation
This section covers the points to be checked along with the names and functions of respective parts.
4-1
Checking the product
Upon opening the package, verify that the items listed below are included.
Report any missing or damaged items to the branch or sales office from which you purchased the product.
Verify the model number of the purchased unit against the number shown on the package label.
Check the model number of the lineard motor and driver against the number shown on the nameplate. For the unit
combinations of lineard motors and drivers, refer to p.10.
Illustration shows the lineard motor with an electromagnetic brake (B type).
· Lineard motor 1 unit
· Driver 1 unit
· Driver mounting brackets
2 pcs.
· Control input/output
connector 1 set
· OPERATING MANUAL
(this manual) 1 copy
· Screws for driver mounting
brackets (M3) 4 pcs.
· Varistor 1 pc.
(electromagnetic brake type only)
4-2
How to read the model number
LAS 2 F 500 M W - 5
Rack stroke
1
: 100 mm (3.94 in.)
6
: 600 mm (23.62 in.)
2
: 200 mm (7.87 in.)
7
: 700 mm (27.56 in.)
3
: 300 mm (11.81 in.)
8
: 800 mm (31.50 in.)
4
: 400 mm (15.75 in.)
9
: 900 mm (35.43 in.)
5
: 500 mm (19.69 in.)
10
: 1000 mm (39.37 in.)
*
LAS2B
(
F
): Up to 800 mm (31.50 in.)
Power input
W
: Single-phase 100-115/200-230 V
S
: Three-phase 200-230 V
Electromagnetic brake
A
: Without electromagnetic brake
M
: With electromagnetic brake
Name of the series:
LAS
series
Rack maximum speed: mm/s
Direction of rack movement
B
: Parallel with mounting foot surface
F
: Vertical to mounting foot surface
Model
2
: 60 mm (2.36 in.) square
4
: 80 mm (3.15 in.) square
