background image

4

 

y

Unauthorized reproduction or copying of all or part of this manual is prohibited.

 

y

Oriental Motor shall not be liable whatsoever for any problems relating to industrial 
property rights arising from use of any information, circuit, equipment or device 
provided or referenced in this manual.

 

y

Characteristics, specifications and dimensions are subject to change without notice.

 

y

While we make every effort to offer accurate information in the manual, we welcome 
your input. Should you find unclear descriptions, errors or omissions, please contact the 
nearest office.

 

y

 and 

 are registered trademark or trademark of Oriental Motor 

Co., Ltd., in Japan and other countries. 

© Copyright ORIENTAL MOTOR CO., LTD. 2012

Published in February 2018

 

Technical Support  Tel:(800)468-3982

8:30 

A.M.

 to 5:00 

P.M.

, P.S.T. (M-F)

7:30 

A.M.

 to 5:00 

P.M.

, C.S.T. (M-F)

www.orientalmotor.com

Schiessstraße 44, 40549 Düsseldorf, Germany

Technical Support  Tel:00 800/22 55 66 22

www.orientalmotor.de

Tel:01256-347090

www.oriental-motor.co.uk

Tel:01 47 86 97 50

www.orientalmotor.fr

Tel:02-93906346

www.orientalmotor.it

Tel:+55-11-3266-6018

www.orientalmotor.com.br

• Please contact your nearest Oriental Motor office for further information.

4-8-1Higashiueno,Taito-ku,Tokyo 110-8536 

Japan

Tel:03-6744-0361

www.orientalmotor.co.jp

Tel:0800-060708

www.orientalmotor.com.tw

Singapore

Tel:1800-8420280

www.orientalmotor.com.sg

Tel:1800-806161

www.orientalmotor.com.my

Korea

Tel:080-777-2042

www.inaom.co.kr

Tel:1800-888-881

www.orientalmotor.co.th

Tel:400-820-6516

www.orientalmotor.com.cn

Tel:+91-80-41125586

www.orientalmotor.co.in

Hong Kong Branch

Tel:+852-2427-9800

Safety precautions

The precautions described below are intended to prevent danger or injury to the user 
and other personnel through safe, correct use of the product. Use the product only after 
carefully reading and fully understanding these instructions.

Handling the product without observing the instructions that accompany a “Warning” 
symbol may result in serious injury or death.

General

 

y

Do not use the product in explosive or corrosive environments, in the presence of 
flammable gases, locations subjected to splashing water, or near combustibles. Doing 
so may result in fire or injury.

 

y

Assign qualified personnel the task of installing, wiring, operating/controlling, 
inspecting and troubleshooting the product. Failure to do so may result in fire, injury 
or damage to equipment.

 

y

The actuator will lose its holding torque when its excitation or the power supply is 
turned off. Take measures to keep the moving part in position if the product is used 
in vertical operations such as elevator applications. Failure to provide such measures 
may cause the moving parts to fall, resulting in injury or damage to equipment.

 

y

Do not use the brake mechanism of the actuator with an electromagnetic brake for 
stopping or for safety purposes. The electromagnetic brake is used for the purpose to 
hold the moving part and actuator in position. Failure to do so may result in injury or 
damage to equipment.

 

y

With certain types of alarms (protective functions), the actuator may stop when the 
alarm generates and the holding torque will be lost as a result. This may result in injury 
or damage to equipment.

 

y

When the alarm is generated, first remove the cause and then clear the alarm. 
Continuing the operation without removing the cause of the problem may cause 
malfunction of the actuator and driver, leading to injury or damage to equipment.

Connection

 

y

Keep the input power voltage of the driver within the specified range. Failure to do so 
may result in fire.

 

y

For the driver power supply, use a DC power supply with reinforced insulation on its 
primary and secondary sides. Failure to do so may result in electric shock.

 

y

Connect the cables securely according to the wiring diagram. Failure to do so may 
result in fire.

 

y

Do not forcibly bend, pull or pinch the cable or lead wire. Doing so may cause fire. 
Repetitive stress or overstress on the connection part may cause damage to the 
product.

Operation

 

y

Turn off the driver power in the event of a power failure. Or the actuator may suddenly 
start when the power is restored and this may cause injury or damage to equipment.

 

y

Do not turn the excitation to off while the actuator operates. The actuator will stop 
and lose its holding power. Doing so may result in injury or damage to equipment.

 

y

Configure an interlock circuit using a sequence program so that when a RS-485 
communication error occurs, the entire system including the driver will operate on the 
safe side.

Repair, disassembly and modification

 

y

Do not disassemble or modify the actuator and driver. This may cause injury. Refer 
all such internal inspections and repairs to the branch or sales office from which you 
purchased the product.

Handling the product without observing the instructions that accompany a “Caution” 
symbol may result in injury or property damage.

General

 

y

Do not use the actuator and driver beyond its specifications. Doing so may result in 
injury or damage to equipment.

 

y

Keep your fingers and objects out of the openings in the actuator and driver. Failure to 
do so may result in fire or injury.

 

y

Do not touch the actuator and driver while operating or immediately after stopping. 
The actuator and driver may be hot and cause skin burn(s).

Transportation

 

y

Do not hold the moving part (screw shaft) of the actuator, cable or lead wire. This may 
cause injury.

Installation

 

y

Install the actuator and driver in the enclosure. Failure to do so may cause injury.

 

y

Keep the area around the actuator and driver free of combustible materials. Failure to 
do so may result in fire or skin burn(s).

 

y

Provide a cover over the moving part (screw shaft) of the actuator. Failure to do so may 
result in injury.

Connection

 

y

The power supply connector (CN1), I/O connector (CN2), data edit connector (CN3) 
and RS-485 communication connector (CN6/CN7) of the driver are not electrically 
insulated. When grounding the positive terminal of the power supply, do not connect 
any equipment (PC, etc.) whose negative terminal is grounded. Doing so may cause 
the driver and PC to short, damaging both.

 

y

When connecting, check the indication of the driver case and pay attention to the 
polarity of the power supply. Reverse-polarity connection may cause damage to 
the driver. The power supply circuit and the RS-485 communication circuit are not 
insulated. Therefore, when controlling multiple drivers via RS-485 communication, 
the reverse polarity of the power supply will cause a short circuit and may result in 
damage to the drivers.

Operation

 

y

Use a actuator and driver only in the specified combination. An incorrect combination 
may cause a fire.

 

y

Provide an emergency stop device or emergency stop circuit external to the 
equipment so that the entire equipment will operate safely in the event of a system 
failure or malfunction. Failure to do so may result in injury.

 

y

Before supplying power to the driver, turn all control input to the driver to OFF. 
Otherwise, the actuator may suddenly start when the power is turned on and it may 
cause injury or damage to equipment.

 

y

Set a suitable speed and acceleration/deceleration rate. Improper setting may cause 
loss of the motor synchronism of the actuator and moving the load to an unexpected 
direction, which may result in injury or damage to equipment.

 

y

Do not touch the moving part (screw shaft) of the actuator while operating. This may 
cause injury.

 

y

Before moving the moving part (screw shaft) of the actuator directly by the hands, 
confirm that the power supply or actuator excitation is turned off and the actuator 
current is cut off. Failure to do so may result in injury.

 

y

The actuator surface temperature may exceed 70 °C (158 °F) even 
under normal operating conditions. If the operator is allowed to 
approach the running actuator, attach a warning label as shown 
below in a conspicuous position. Failure to do so may result in skin 
burn(s).

Warning label

 

y

Immediately when trouble has occurred, stop running and turn off the driver power. 
Failure to do so may result in fire or injury.

 

y

Static electricity may cause the driver to malfunction or suffer damage. Do not touch 
the driver while the driver power is on. Always use an insulated screwdriver to adjust 
the driver switches.

Disposal

 

y

To dispose of the actuator or driver, disassemble it into parts and components as 
much as possible and dispose of individual parts/components as industrial waste. If 
you have any question, contact your nearest Oriental Motor branch or sales office.

Отзывы: