1
Introduction
Before use
Only qualified personnel of electrical and mechanical engineering should
work with the product.
Use the product correctly after thoroughly reading the "Safety precautions."
In addition, be sure to observe the contents described in warning, caution,
and note in this manual.
The product described in this manual has been designed and manufactured
to be incorporated in general industrial equipment. Do not use for any other
purpose. Oriental Motor Co., Ltd. is not responsible for any damage caused
through failure to observe this warning.
Overview of the product
This product is a motor and driver package consisting of a board type
microstepping driver equipped with the smooth drive function and a
stepping motor designed for high-torque and low-vibration.
Operating Manuals for the
CVK
Series
Operating manuals for the
CVK
Series are listed below. Use the product
properly after carefully reading the operating manual.
•
Motor
y
2-phase Stepping Motor
PKP
Series OPERATING MANUAL
y
5-phase Stepping Motor
PKP
Series OPERATING MANUAL
•
Driver
y
2-phase and 5-phase Stepping Motor and Driver Package
CVK
Series
OPERATING MANUAL Driver (this document)
Safety precautions
The precautions described below are intended to prevent danger or injury
to the user and other personnel through safe, correct use of the product.
Use the product only after carefully reading and fully understanding these
instructions.
Description of signs
Handling the product without observing the instructions
that accompany a "Warning" symbol may result in serious
injury or death.
Handling the product without observing the instructions
that accompany a “Caution” symbol may result in injury
or property damage.
The items under this heading contain important handling
instructions that the user should observe to ensure safe
use of the product.
HM-60119-7
O P E R A T I N G M A N U A L
Thank you for purchasing an Oriental Motor product.
This Manual describes product handling procedures and safety precautions.
y
Please read it thoroughly to ensure safe operation.
y
Always keep the manual where it is readily available.
2-phase and 5-phase Stepping Motor and Driver Package
CVK
Series Driver
MSIP-REM-OMC-075
MSIP-REM-OMC-076
Description of graphic symbols
Indicates "prohibited" actions that must not be performed.
Indicates "compulsory" actions that must be performed.
y
Do not use the product in explosive or corrosive environments, in
the presence of flammable gases, locations subjected to splashing
water, or near combustibles.
This may cause fire or injury.
y
Do not forcibly bend, pull or pinch the cable.
This may cause fire.
y
Do not turn the AWO input to ON while the motor is operating.
This may cause injury or damage to equipment.
y
Do not disassemble or modify the product.
This may cause injury.
y
Assign qualified personnel the task of installing, wiring, operating/
controlling, inspecting and troubleshooting the product.
Failure to do so my result in fire or injury.
y
If this product is used in a vertical application, be sure to provide a
measure for the position retention of moving parts.
Failure to do so may result in injury or damage to equipment.
y
When the driver generates an alarm (any of the driver's protective
functions is triggered), first remove the cause and then clear the
alarm (protective function).
Continuing the operation without removing the cause of the
problem may cause malfunction of the driver, leading to injury or
damage to equipment.
y
Install the product in an enclosure.
Failure to do so may result in injury.
y
Keep the driver’s input-power voltage within the specified range.
Failure to do so may result in fire.
y
For the driver power supply use a DC power supply with reinforced
insulation on its primary and secondary sides.
Failure to do so may result in electric shock.
y
Connect the cables securely according to the wiring diagram.
Failure to do so may result in fire.
y
Turn off the driver power in the event of a power failure.
Failure to do so may result in injury or damage to equipment.
Introduction .................................................1
Safety precautions ......................................1
Precautions for use ......................................2
General specifications ................................2
Regulations and standards ........................2
Preparation ...................................................2
Installation ....................................................3
Connection ...................................................4
Setting .........................................................10
Inspection ...................................................11
Alarms ..........................................................11
Accessories..................................................12
