3 Preparation
－
8
－
3 Preparation
The following describes the items to be confirmed, names and functions of
individual components.
3.1 Checking the product
Open the package and make sure that the following items are supplied. If there is
any shortage or damage, contact the sales office where you bought the product.
The unit model of the product you bought should be checked by reference to the
model on the label of the package.
Check the models of the gearhead, motor and driver by reference to the models on
the name plate of each product.
The table on page 9 shows the combination of the gearhead, motor and driver
according to unit models.
Round shaft type, Pinion shaft type, Geared type
•
One motor
•
One driver
•
One input/output signal cable [300 mm (11.8 in.)]
•
One power cable [300 mm (11.8 in.)]
•
Manual
Combination type
•
One motor with gearhead
•
One key
•
One driver
•
One input/output signal cable [300 mm (11.8 in.)]
•
One power cable [300 mm (11.8 in.)]
•
One set of hexagon socket head bolts (four each of bolts, plain washers and nuts)
•
Manual
