5 Connection
－
18
－
5 Connection
The following shows the method of connecting the driver and motor/power
source/external controller, earth connection method, an example of connection and
input/output signals.
5.1 Motor connection
Insert the motor cable connector into the motor connector (
AXH015
/
AXH230
/
AXH450
type: CN3,
AXH5100
type: CN3 and CN4) of the driver.
Note
•
Firmly insert the connector in position. Incomplete connection of the
connector may cause operation failure, or may damage the motor or driver.
•
Do not push or pull the cable. Handle only the plastic connector instead. Do
not apply force in any direction other than that in which the connector is
inserted or pulled out. Improper application of force may damage the
connector and driver.
When extending the motor cable, use the optional extension cable. The maximum
extension distance including the cable length of the motor itself should be 2 m
(6.6 ft.).
Option model
Applicable unit type
CC02AXH
[1.5 m (4.9 ft.)]
AXH015
type,
AXH230
type,
AXH450
type
CC02AXH2
[1.5 m (4.9 ft.)]
AXH5100
type
2 m (6.6 ft.)
CC02AXH
or
CC02AXH2
To driver
It is also possible to use
FC02HBL
[1.5 m (4.9 ft.)] for
the lead wire type of
AXH230
and
AXH450
.
