Family of Brands – ILX Lightwave
®
• New Focus™ • Ophir
®
• Corion • Richardson Gratings™ • Spectra-Physics
®
MLIDA, Rev A
8 DETECTORS
8.1 ORIEL LIDA-COMPATIBLE DETECTORS
A broad selection of detectors are compatible with this system, allowing measurement of optical
radiation from UV to IR. Each LIDA detector includes an integrated amplifier. All models except
pyroelectric include a selectable gain switch. The LIDA detectors include all cables necessary to
perform measurements.
Thermoelectrically cooled detectors include a cable that connects to the 77055 Cooler Controller.
A special cable is included with each LIDA detector, providing power from the SR810 to the
integrated detector amplifiers.
Each detector model features a 1.5-inch series flange, which is compatible with a wide variety of
Oriel accessories and instruments. A 1/4-20 threaded hole is located on the bottom of the housing,
allowing the any detector to be rod mounted if desired.
Model
Number
Description
DET-L-SIUV-R-C
UV-enhanced Si photodiode w/transimpedance amplifier, 200-1100 nm
sensitivity, 10 mm x 10 mm active area, NIST traceable calibration
DET-L-SIUV-T-C
UV-enhanced Si photodiode w/integrated transimpedance amplifier, 200-
1100 nm sensitivity, 1-stage TE cooled, 5 mm diameter active area, NIST
traceable calibration
DET-L-GE-R-C
Ge photodiode w/integrated transimpedance amplifier, 700-1800 nm
sensitivity, 5 mm diameter active area, NIST traceable calibration
DET-L-GE-T-C
Ge photodiode w/integrated transimpedance amplifier, 700-1800 nm
sensitivity, 2-stage TE cooled, 5 mm diameter active area, NIST traceable
calibration
DET-L-PYC5-R-P
Lithium tantalate pyroelectric detector w/integrated FET amplifier and high
speed signal processing electronics, 0.45-9 µm sensitivity, 5 mm diameter
active area, NIST traceable calibration
DET-L-PYK5-R-P
Lithium tantalate pyroelectric detector w/integrated FET amplifier and signal
processing electronics, 0.6-50 µm sensitivity, 5 mm diameter active area,
NIST traceable calibration
DET-L-PBS-R-U
PbS photodiode w/integrated voltage supply and AC coupled pre-amplifier,
0.7-0.3 um sensitivity, 3 mm x 3 mm active area
