Organic Energy Easypel, Руководство по эксплуатации

Страница: 28 / 40

28 Setting the boiler heating period
9.2 Setting the boiler heating period
Note:
This function is only available if an external heating controller is used and no DHW sensor is connected to
the boiler controller.
Please also refer to the installation manual, chapter 13, "
Controller for heating and hot water "
If heating periods are programmed, the boiler runs at the set times.
During these periods, burner requests from the external controller (terminal 7/8) are ignored.
Outside the programmed heating periods, burner demand from the external controller (terminal 7/8) is active
again.
Note:
Programming of heating periods is NOT advisable if an external controller is used!
– button
Cursor at the hour.
– button
200013_EN 1.2