6
EN
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius with 70 to 75
percent accuracy. The weather forecast is always
displayed.
SUNNY
PARTLY
CLOUDY
RAINY
CLOUDY
TEMPERATURE
This product can display current, minimum, and
maximum temperature information collected by the
remote sensors and main (indoor) unit.
Outdoor data is collected and displayed every 40 sec-
onds. Indoor data is collected and displayed every 10
seconds.
SELECT TEMPERATURE UNIT
Slide the
°
C /
°
F
switch into the desired location. The
switch is located in the main unit battery compartment.
The setting for the main unit overrides the remote
sensor setting.
SELECT CHANNEL NUMBER
Press
CHANNEL
to switch between sensors 1-3.
The icon shows the selected sensor.
To auto-scan between sensors, press and hold
CHANNEL
for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL
or
MEMORY
.
NOTE
For more information on the sensor see
"Remote Sensor THN122N" section.
KINETIC-WAVE
ICON
Designated
Indoor
Remote
Remote
Remote
Display
Display
Display
Display
Display
Channel 1
Channel 2
Channel 3
ALARMS
This product is equipped with a 2-minute crescendo
alarm.
VIEW ALARM SETTINGS
Press . The alarm time and alarm status will show
in the Clock Area.
SET ALARM
1. Press to switch to alarm display.
2. Press and hold again for 2 seconds. The alarm
settings will blink.
3. Select the hour and minute. Press
or
to
change settings. Press to confirm.
ACTIVATE ALARM
Press to activate or deactivate the alarm. shows
in the Clock / Alarm Area when the alarm is activated.
SILENCE ALARM
When the alarm time is reached, the crescendo alarm
will sound for 2 minutes. To silence the alarm:
• Press
SNOOZE
to silence it for 8 minutes.
OR
• Press any key except
SNOOZE
to mute the alarm
and activate it again after 24 hours.
If no button is pressed, the alarm will automatically
silence after 2 minutes. It will then sound again after 8
minutes.
BAR636_M_EN.p65
2005.4.28, 9:44 AM
6
