Orcam MyEye 2 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 47

background image

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician.

FCC Warning

A distance of at least 0.5 cm. between the equipment and all persons should be maintained during the operation of the equipment.
This device complies with FCC Rules Part 15: Operation is subject to two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference that may be received or that may cause undesired operation.
Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules.

NOTE:

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED

MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.

CE Compliance - Authorized European Community Representative

Medes Limited
5 Beaumont Gate, Shenley Hill, Radlett, Hertfordshire, London WD7 7AR, United Kingdom. Telephone: +44 20 8123 8056 Fax:
+44 1923 859 810.

«
...
42
43
44
45
46
...
»

Содержание MyEye 2
















































Отзывы:

Нет отзывов

Похожие инструкции для MyEye 2

Бренд: Eschenbach Страницы: 28

Бренд: 3D3 Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды