4.
If you did not hear the phrase,
“OrCam is ready,” or you are not
sure that the unit is on, press one
of the volume buttons (UP or
DOWN). If the device is on, you
will hear a response to your action.
5.
To turn the device off, press the
Power button once. You will hear
the message “Suspending. Press
again to shut down.” Press the
power button a second time. You
will hear, “Shutting down, please
wait.” Right before the unit shuts
down completely, the device says,
“Power off. Bye Bye.”
To enter or exit Suspend mode:
6.
To enter Suspend mode, press the
POWER button once. The device
announces “Suspending. Press
again to shut down”, then
announces “Suspending” and
automatically goes into Suspend
Mode.
7.
To exit Suspend mode press the
TRIGGER or VOLUME button on
the base Unit or gently tap the
center of the bottom of the Head
Unit where the small OrCam logo
is situated. You will hear, “Waking
up. Battery is [this many] percent
charged.”
Automatic Suspend and Power Off
– To
conserve battery power, the OrCam device
has an automatic suspend feature. If you do
not trigger the device in some way, the
device automatically goes into Suspend
mode after three minutes of inactivity. When
the OrCam device is not used for about three
hours, it shuts itself off. This reduces the
chance of unnecessarily depleting the
battery.