the mount to come loose and will not be able
to support the weight of the device. In case
the mount comes off of the glasses frame
you can replace it with a spare mount.
Attaching the Mount to
Eyeglasses
Clear a work surface and put together these
items for the mount assembly:
1.
Your glasses frame
2.
Your OrCam device - preferably
powered off
3.
The plastic mount
4.
Pair of small scissors (as provided
in the delivery box)
Step by Step Assembly of the plastic mount:
on right arm of glasses frame:
1.
Remove the tab from the back side
of the mount.
2.
Attach the Head Unit onto the
mount.
3.
Ensure the two straps are facing
upwards (down if you choose to
assemble on the left side).
4.
Hold your glasses frame the right
way up - lenses are facing away
from you.
5.
Position the mount correctly on the
arm of your glasses as follows:
Align the front end of the Head
Unit camera with the front end of
your glasses frame.
6.
Ensure the Head Unit is parallel to
the glasses frame’s arm and that
the camera is facing forward.
7.
Press the mount onto the arm of
the glasses frame.
8.
Carefully detach the Head Unit
from the mount.
9.
Carefully cut the top of the straps
along the indicated marking.
10. Pull each strap around the inner
side of arm and through the hole
on the bottom side of the mount.
