Orbitalum RA 41 Plus, Руководство по эксплуатации

Страница: 7 / 40

Operating instructions RA 41 Plus (H) 1 Notes on safety
orbitalum tools gmbh
(07.08)
MT_RA 41 Plus (H)_BA_04_790046773_04.doc
3
1 Notes on safety
The Pipe Cutting and Beveling Machine (referred to as RA 41 Plus (H) in the
following) is a state-of the-art machine. Using it for purposes other than those
described in this manual may cause injury to the user or to others. It may also
damage the machine or other equipment.
Therefore:
•
Always ensure that the machine is in good working order and comply with
these notes on safety.
•
Keep complete documents close by the machine.
•
Generally valid regulations for the prevention of accidents must be
observed.
1.1 Proper use
•
Only use the RA 41 Plus (H) for cutting and beveling of pipes.
•
For damages caused by using not according to regulations is just the user
responsible.
1.2 Safety regulations
•
Only use the dimensions and materials specified in this manual. Always
consult Orbitalum Tools after-sales service personnel before using other
materials.
•
Only use original Orbitalum Tools spare parts and auxiliaries.
•
Inspect the RA 41 Plus (H) every day for visible signs of damage or
defects. Any damage or defect must be repaired immediately.
•
Work on the electrical installations may only be performed by a qualified
electrician.
•
Disconnect from the mains before changing the tools, maintenance- and
repair-works and allow the machine to run a stop.
•
Do not use the RA 41 Plus (H) unless all safety devices (restart inhibitor,
overload protection and saw blade guard) are working properly and the
fixtures are fitted securely on the baseplate or pipe-supply.