Orbitalum RA 41 Plus, Руководство по эксплуатации

Страница: 32 / 40

7 Operation Operating instructions RA 41 Plus (H)
28
(07.08)
MT_RA 41 Plus (H)_BA_04_790046773_04.doc
orbitalum tools gmbh
7. Switch the motor on.
8. Using the grip (1) turn the motor carefully in a clockwise direction until the
wall of the pipe has been pierced.
9. Continue to turn smoothly until the tube has been cut and the markings (2)
on the rotary element and housing are in line.
10. Turn the pipe cutter back to its home position.
11. Switch the motor off.
After cutting, loosen the hexagon nut on the saw blade to prevent damage
caused by tension.
7.7.2 Simultaneous cutting and beveling of pipes (s = 2 – 4.5 mm)
1. Set the pipe dimension as described in section 7.3.4, p. 20.
2. Proceed according to the steps described in section 7.7.1, p. 27.
For continuous
operation