Orbit Merret OM 652UC, Инструкция по эксплуатации

Страница: 56 / 64

56
|
INSTRUCTIONS FOR USE OM 652UC
ERROR CAUSE ELIMINATION
E. D. Un.
Number is too small (large negative) to be
displayed change DP setting, channel constant
E. D. Ou.
Number is too large to be displayed change DP setting, channel constant
E. T. Un.
Number is outside the table range increase the table values, change input setting
(channel constant)
E. T. Ow.
Number is outside the table range increase the table values, change input setting
(channel constant)
E.I. Un.
Input quantity is smaller than permitted input
quantity range change input signal value or input (range)
setting
E.I. OW.
Input quantity is larger than permitted input
quantity range change input signal value or input (range)
setting
E. HW.
A part of the instrument does not work
properly send the instrument for repair
E. EE
Data in EEPROM corrupted perform restoration of manufacture setting, upon
repeated error statement send instrument for
repair
E.. DATA
Data in EEPROM outside the range perform restoration of manufacture setting, upon
repeated error statement send instrument for
repair
E. CLR
Memory was empty
(presetting carried out) upon repeated error statement send instrument
for repair, possible failure in calibration
9 ERROR STATEMENTS