Orbit Merret OM 652UC, Инструкция по эксплуатации

Страница: 35 / 64

INSTRUCTIONS FOR USE OM 652UC
|
35
6.1.2g Selection of the type of input
6.1.2h
Setting input level
INPUT
SERVIC.
OUTPUT.
CHANNE.
EXT.IN.
CONFIG
KEYS
DEF
NPN.CON
PNP MODE
LEVEL.C
TYPE C
LEVEL.A
M. STOP
BACKUP
POLAR.
M.START
M. TIME
FILTER
TYPE A
SET. v . CLEAR
TYPE A
Selection of type of input
- setting applies for Input A
NPN.CON
Type of input NPN and
upon contact
PNP
Type of input PNP
Input levels (Level A) must be set after this selection
!
INPUT
SERVIC.
OUTPUT.
CHANNE.
EXT.IN.
CONFIG
KEYS
10
MODE
LEVEL.C
TYPE C
M. STOP
BACKUP
POLAR.
M.START
M. TIME
FILTER
TYPE A
LEVEL.A
SET. v . CLEAR
LEVEL.A
Setting input level
- setting applies for Input A
- setting level (only for type PNP) of the
input voltage, the instrument subsequently
automatically selects divider and thus
comparing levels
- range of setting 0…43 V
(Input A < 30 V, bracket No. 13)
(Input C < 30 V, bracket No. 14)
- range of setting 43…300 V
(Input A <300 V, bracket No. 18)
(Input C <300 V, bracket No. 16)
- table of comparing levels is on page 7
6 SETTING
profi profi
Nastavení pro vstup Nulovani (type C) je shodné s
nastavením Vstupu A
!
Nastavení pro vstup Nulovani (Level. C) je shodné s
nastavením Vstupu A
!
Setting for input Resetting (type C) is identical with
setting for Input A
!
Setting for input Resetting (Level. C) is identical with
setting for Input A
!