Orbit Fitness T6610N, Руководство пользователя

Страница: 30 / 40

29
“ C
ONSOLE
I
NSTRUCTIONS –
H
.
R
.
C
.
P
ROGRAM (P9 ~ P12) ”
“ F. START EXERCISE ”
START/ PAUSE
button: Press
START/ PAUSE
to begin exercise. “ START ” would then appear on the screen
“ G. DURING WORKOUT, ALWAYS MONITOR YOUR CURRENT HEART RATE STATUS ”
NOTE for HEART RATE:

You must place both of your hands on the Pulse Sensors located on the Seat Handlebar . Your pulse will be
displayed approximately few seconds after the heart symbol “ ” is
displayed

If you do not place your hands correctly and a few seconds pass without a pulse input,
the console will turn off the pulse circuit. The console will then display an error message
“P”. Place your hands back on the Pulse Sensors correctly, the pulse readout will
appear again
“ H. DURING WORKOUT, THE TORQUE/TENSION LEVEL IS EASILY CHANGED AT ANY TIME ”
UP
or DOWN
button: You can change the torque/tension level (from 1 to 16 levels) at any time
during workout by pressing
UP or DOWN
button
I. DURING WORKOUT, HOW TO REVIEW SPEED, DISTANCE, CALORIES, RPM, ODO (ODOMETER) AND WATT ”
During workout (after pressing
START/ PAUSE
), the user could press
MODE
to select SPEED , DISTANCE and
CALORIES , or RPM , ODO (Odometer) and WATT
RPM , ODO , WATT will show at the same time SPEED , DISTANCE, CAL. will show at the same time
About ODO (odometer) , the function is similar to DISTANCE , will accumulate the total distance traveled by the item
during workout
.
If there is any necessary to reset ODO ’s distance value, press
UP
,
MODE
,
DOWN
and
ENTER
at the same time to let the motor automatically calibrate to reset ODO
value to zero