Orbit Fitness T6610N, Руководство пользователя

Страница: 33 / 40

32
“ C
ONSOLE
I
NSTRUCTIONS –
U
SER
S
ETTING
P
ROGRAM (P13 ~ P16) ”
“ D. SET THE DESIRED CALORIES and YOUR AGE ”
ENTER
button and then
UP or DOWN
button:
a. Press
ENTER
button to confirm the CALORIES value and enter the mode to set the AGE
b. Use
UP or DOWN
buttons to set your AGE (10 TO 99 YEARS OLD; 1 YEAR OLD
INCREMENT)
NOTE for CALORIES:
NOTE : Although the console allows input for ages beginning at 10 years old, the product is not recommended
for children’s use.
“ E. SET THE TORQUE/RESISTANCE LEVEL ”
ENTER
button and then
UP or DOWN
button:
a. The USER SETTING PROGRAM allows the user to manually set the torque/resistance
level, the console will divide the time into 10 intervals. The user could through their
preference to set the desired torque/resistance level in each time interval.
b. Press
ENTER
button to confirm the AGE value and enter the mode to set the EACH
TIME INTERVAL OF TORQUE/RESISTANCE LEVEL (1 TO 16
TORQUE/RESISTANCE LEVELS; 1 TORQUE/RESISTANCE LEVEL INCREMENT) ,
then press ENTER button to confirm.
c. Continue following the above process to finish setting the preference.
TORQUE/RESISTANCE LEVEL in 10 time intervals. The program profile will be storied
in the memory after setup. You can modify the profile anytime under the STOP mode.
“ F. START EXERCISE ”
START/ PAUSE
button: Press
START/ PAUSE
to begin exercise. “ START ” would then appear to the screen.
“ G. DURING WORKOUT, ALWAYS MONITOR YOUR CURRENT HEART RATE STATUS ”
NOTE for HEART RATE:

You must place both of your hands on the Pulse Sensors located on the Seat Handlebar .
Your pulse will be displayed approximately few seconds after the heart symbol “ ” is
displayed

If you do not place your hands correctly and a few seconds pass without a pulse input, the
console will turn off the pulse circuit. The console will then display an error message “P”.
Place your hands back on the Pulse Sensors correctly, the pulse readout will appear
again