Orban OPTIMOD-FM 8600S Скачать руководство пользователя страница 97

Страница: 97 / 354

OPTIMOD-FM DIGITAL

INSTALLATION

2-41



mono-from right-channel (

MONO-R

) mode



mono-from-sum-of-channels (

MONO-SUM

)



bypass mode



Independently activate and defeat the diversity delay applied to the ana-
log, digital, and composite outputs.



exit test (restores the operating preset that was on-air before a test mode
was invoked)



mod. reduction 1



mod. reduction 2



exit mod. reduction

When you have programmed an event to your satisfaction, press the

AVE

VENT

button.

You will return to the automation menu.

To edit an existing event:

Press the

IEW

DIT

VENT

button.

Select

Next/Prev

to sort by either the event times or event tasks.

Turn the knob until you see the event you wish to edit.

Press the

DIT

VENT

button.

Edit the event as desired. Use the same technique as adding an event.

See step 3 on page 2-40.

Press the

AVE

VENT

button

to store your edits.

To delete an event:

Press the

ELETE

VENT

button.

Select

Next/Prev

to sort by either the event times or event tasks.

Choose the event to delete with the knob.

You can search by date or by event (i.e., recalling a given preset). Use the

Next

button to navigate from one type of search to the other type.

When you have located the event you want to remove, press the

ELETE

VENT

button.

This action will immediately delete the event. There is no “are you sure”
warning message. To abort the deletion, press the

button, not the

ELETE

VENT

button.

Содержание OPTIMOD-FM 8600S



































































































































































































































































































































































Результаты поиска

Содержание OPTIMOD-FM 8600S

Отзывы:

Похожие инструкции для OPTIMOD-FM 8600S

Бренды по названию

Популярные бренды

Orban OPTIMOD-FM 8600S, Руководство по эксплуатации

Результаты поиска

Содержание OPTIMOD-FM 8600S

Отзывы:

Похожие инструкции для OPTIMOD-FM 8600S

Бренды по названию

Популярные бренды