ORB SCSI INTERNAL, Руководство пользователя

Страница: 6 / 35

!
!
Locate an unused drive bay
You should see one or more plastic or metal plates on the face of your computer
near the floppy, CD-ROM or DVD drives. These are the unused drive bays. The
ORB drive mounts in a 3
1 /
2
- inch drive bay. If you only have a 5 1 /
4
-inch drive bay,
you will need to use the 5 1 /
4
-inch bay adapter.
Figure 3
Tower with open 5 1 /
4
and 3 1 /
2
-inch drive bays
Mounting the Drive Into a 5 1 /
4
-inch Adapter
Note:
The remainder of this section provides instructions for mounting your ORB
drive into a 5 1 /
4
-inch bay adapter.
1. Slide the drive into the adapter.
If installing the ORB drive into a 5 1 /
4
-inch bay with an adapter be sure to use the
screws provided with your adapter.
CAUTION: Be careful doing this to avoid damage to the drive.
Figure 4
ORB drive insertion
into 5
1 /
4
-inch adapter
2. Line the holes of the drive up with the holes of the adapter and
insert two flat-end screws into each side of the drive.
Figure 5
Mounting ORB drive
into 5
1 /
4
-inch adapter
CAUTION: Mounting screw lengths have been chosen so that
no more than
1
/
8
-inch of the screw enters the frame-mount-
ing hole of the drive. The torque applied to the mounting
screws should be between 4 and 6 inch-pounds.
5
Empty 5 1 /
4
- inch bay
Empty 3 1 /
2
- inch bay
INS
TA
LL
AT
ION
GUIDE