ORB SCSI INTERNAL, Руководство пользователя

Страница: 3 / 35

THINGS TO CONSIDER:
In the process of installing the ORB drive, it will be necessary for you to open up
your computer and identify, as well as work with, various pieces of hardware inside
it (such as those mentioned in the questions below). If you feel in any way unsure
of performing this installation or if you cannot answer “yes” to most of the ques-
tions below, then we strongly recommend contacting a qualified computer techni-
cian to install or assist in the installation.
1. Have you opened your computer before?
2. Have you physically removed an internal SCSI device before?
3. Do you have access to technical assistance to help with the installation?
4. Are you familiar with the difference between a 3
1 /
2
and a 5 1 /
4
-inch bay?
5. Do you know what operating system is used on your computer?
6. Do you have a computer system user manual immediately available?
7. Have you read your computer Owner/User manual?
8. Are you familiar with your computer system motherboard or SCSI host bus
adapter?
9. Have you set up an internal SCSI device in the past?
10. Are you familiar with an internal SCSI ribbon cable?
11. Have you connected an internal SCSI ribbon cable to the motherboard or SCSI
host bus adapter in the past?
12. Are you familiar with jumper settings on an internal SCSI device?
13. Have you changed the SCSI ID on an internal SCSI device in the past?
14. Does your computer have an empty 3
1 /
2
or 5 1 /
4
-inch bay with front access?
15. Do you know which drive bay you intend to use to install the ORB drive?
16. If you selected the 5
1 /
4
-inch bay, do you have a kit to enable the installation of
the 3 1 /
2
-inch ORB drive into a 5 1 /
4
-inch drive bay?
2